How to Wash a Non-Iron Shirt

Though many are interested in using non-iron shirts and other garments, it may seem inconvenient for some to handle such garments especially when it comes to washing. There are lots of things that you must keep in mind especially when you are aiming to keep the shirt clean and free from any wrinkles at the same time. If you are one of those people who are interested with purchasing non-iron shirts, the following are some of the don’ts on how to wash a non-iron shirt:

  • Never stuff these garments when the machine is already overloaded.

Aside from the fact that the shirt will never get cleaned just as you want to, the crushing between wet fabrics will cause the wrinkles on the shirt. If possible, you can wash it with similar fabrics and let the machine have enough space for washing all clothes where detergent and water is evenly distributed.

  • Never use hot water for washing the shirt or even dry it with the hot setting on your dryer.

No matter how fast you want the shirt to dry after washing, it is best that you do not let it expose with excess heat, as it will cause the wrinkles to stay on the permanent press fabric.

Keep these precautions in mind to keep your non-iron shirt at its best condition and not get any damage.

Proper Steps on How to Wash a Non-Iron Shirt

There are proper ways that you must keep in mind when washing non-iron shirts starting from the things you need to every step of washing the shirts.

What You Need:

  • Stan remover spray or stick
  • A capful or scoop of mild laundry detergent
  • Your washing machine
  • Dryer
  • Hanger


  • Check the shirt for any stains. Once you find any stubborn stains, rub it with the stain remover on the very spot where the stain is, or squirt some stain remover on the area.
  • Pour the detergent on the washing machine on the spot where the water is filling. This is the best way of letting the detergent mix immediately with the water and dissolving it quickly.
  • Turn the machine on after setting it for warm water. Wait until it fills at least half before putting the shirt in the soapy water.
  • Let the machine finish both washing and rinsing cycle.
  • Transfer it in the dryer and adjust it on a permanent press or on a low heating setting. Finish the cycle before removing the shirt.
  • After removing from the dryer, drape it immediately over a hanger while making sure it is hanging straight. Let it hang to prevent it from wrinkling till you are about to wear it.

By following these steps, you are going to prevent the shirt from wrinkling and keep it in its best condition.

If your shirt comes with instructions on how to properly launder it, make sure that you follow the instructions and avoid exposing it to any strong detergent or any excess heat. When hand washing, follow the same instructions, but wash it lightly. Squeeze it instead of wringing and hang it straight on a hanger to air dry.

How to Properly Wash a Shirt

Washing any of your shirts is not just about following instructions about putting detergent and water on your washing machine, throwing in your clothes and waiting for the entire process to finish. If you want your clothes and any important shirts to last long, it is necessary that you know the proper way of washing a shirt whether you are washing by hand or using a washing machine. To learn how to properly wash a shirt, the following are some steps to follow in washing using a machine or by hand.

Basics on How to Properly Wash a Shirt

Whether you are planning to wash your shirt by hand or using a machine, there are certain tips that you must follow to ensure that your shirts are free from dirt and stains and will keep its original shape. Check out the following steps when washing clothes:

Read the Washing Instructions of Clothes with the Label

You want to make sure that your shirt will come out of your machine clean and at its best condition, so check the washing instructions on the label to protect it from getting damaged.

Separate Light Colored Shirts with Dark Colored Ones

This is among the common mistake of first timers. They wash everything together. Dark colored clothes tend to leave their dye when washed while light colored ones pick the colors. Most of the time, the new dark colored clothes are the ones bleeding and staining light colored fabrics. To prevent this, separate the light and dark colored clothes. Though you do not want to settle with two washing loads on your machine, it is necessary to avoid staining. If you are hand washing, you can start washing the light colored shirts first and then slowly proceed to the dark colors.

Prepare the Shirt and Other Clothes

Unbutton the shirts from the collar buttons to the cuff buttons. Remove detachable materials prior to cleaning. Unzip the zippers and keep everything loosened.

Pre-Treat Any Stains

You can try working on stains with dabbing some detergent on the problem areas or spot clean them using a stain remover pain.

Choose the Right Cycle

When washing with a machine, start with a delicate cycle for shirts requiring this setting and then proceed with the normal cycle for all other shirts. If you are hand washing, you can soak the shirts first and then scrub them against the cloth to remove dirt.

What Detergents to Use

Different shirts may require different detergents or soaps when washed. To prevent staining when mixed with other shirts, it is best that you use detergents without bleach as it can also protect dark colored clothes from discoloration.

Drying the Clothes

After you have rinsed the shirts, use the spin cycle for wringing the extra water from the shirts. When hand wringing, you can just squeeze the extra water out of it instead of twisting it as it may stretch the fabric and distort its shape. You can either hang the shirt on using a hanger or a clothespins, but make sure the hanger does not have sharp parts or the clothespins are not tight to prevent leaving marks on the shirt. You can also let them lay over a clean surface and air dry them.